Robot spraying line equipment related introduction

The area occupied by spraying line equipment shall be controlled within the range of 55 m long, 18 m wide, 990 m2 in area, and 8.1 m in rail top height. The heating method is natural gas heating. The casting line for cast iron parts is transported and transported by a self-propelled gourd-bonded flat-bed flatbed truck, and manual loading and unloading of the pendants should be completed. The equipment should have sufficient strength and rigidity, and the production method should be carried out in a batch-type production control mode controlled by PLC. Coordinated operation between bits, and the ability to automatically select multiple products for automatic identification.

 

The paint spraying station adopts automatic spraying of mechanical arm and manual painting. The area of ​​artificial painting cannot exceed 5%. It should be ensured that the line can automatically spray primer and spray paint automatically at the same time. It is not allowed to change the paint pipeline at different time intervals. Paint or finish. Automatic spraying station is mainly configured by spraying robot (explosion-proof type, with teaching function), paint supply system (high-pressure airless paint pump and pipeline, paint paint bucket, paint bucket, pneumatic mixer, etc.), high pressure Airless automatic spray gun, artificial touch-up system and control system.

The spray booth adopts a water-spraying spray booth, and the water spin-spray booth consists of a chamber body (a δ 1.5mm galvanized steel plate is used for folding and assembling and bolting), an air supply system, an air filter device, and a bottom mist treatment device. Exhaust system, lighting device, water circulation system and other components.