Technology

Position: DBH AGV Robot > Technology >

Safety measures of welding robots in working process and maintenance

Author: DANBACH Date: 2018-08-31 source: Internet
Safety measures of welding robots in working process and maintenance
Name: Safety measures of welding robots in working process and maintenance
Category:Technology
Introduction: Welding robots are very convenient to use, but there are also certain safety risks. In order to ensure that everything is safe, we must not only take safety precautions against the welding robo
Manufacturer: DBH Robot
Email: info@dbhrobot.com
TEL: 0791-88133135

Welding robots are very convenient to use, but there are also certain safety risks. In order to ensure that everything is safe, we must not only take safety precautions against the welding robot's workplace, but also take appropriate safety precautions when repairing and inspecting the robot, so as to ensure the safety of equipment and personnel and reduce unnecessary damage and loss.

How to implement safety precautions for welding robot workplaces? First of all, please be sure to ensure the cleanliness of the work area and equipment. If there are oil, water, tools, workpieces, etc. on the ground, it may bring safety hazards to the operators, causing serious accidents.

welding robot

Secondly, each time the tool is used, it must be placed back to the original position outside the welding robot's range of motion to avoid collision between the welding robot and the tool forgotten on the fixture, resulting in accidental damage to the fixture or robot. After all the operations are completed, don't forget to clean the robot and fixture to ensure its cleanliness.

What safety precautions should be taken in the process of maintaining and inspecting the welding robot? Very simple, as a welding robot staff, you must wear specific overalls, safety shoes, and safety helmets before work to provide adequate protection.

Secondly, for the design and manufacturing personnel of the personnel responsible for welding robot system integration and system safety equipment, it is necessary to understand the safety guardrail and safety equipment. It is necessary to read the manual to understand the correct operation and measures to be taken in the event of an emergency.

The other is to strictly abide by the safety rules to avoid accidents or injuries. The person responsible for the maintenance and inspection of the welding robot must check and confirm all the circuits related to the emergency stop and perform it according to the corresponding safety standards. When performing maintenance or inspection work, be sure to press the emergency stop switch at any time to stop the welding robot immediately when needed.


[TOP]