Technology

Position: DBH AGV Robot > Technology >

Routine maintenance of industrial robot arms

Author: DANBACH Date: 2018-10-11 source: Internet
Routine maintenance of industrial robot arms
Name: Routine maintenance of industrial robot arms
Category:Technology
Introduction: In recent years, the cheap labor in the production field has also become a past, the continuous innovation of industrial robot technology
Manufacturer: DBH Robot
Email: info@dbhrobot.com
TEL: 0791-88133135

In recent years, the cheap labor in the production field has also become a past, the continuous innovation of industrial robot technology, shortening the time-to-market of innovative products and improving people's working conditions. The industrial robot arm is an important part of the robot system. How can the robot arm be used for a longer period of time? This requires the user to perform routine maintenance work during the use.
Daily maintenance of industrial robot arm:
First, the guide rail and bearing
The rails and bearings at all shafts should be kept clean and well lubricated. If the robot's robot is running in a dusty environment, the rails need to be cleaned frequently. If you find any metal fragments or powder, it may indicate poor lubrication. In order to ensure proper lubrication, it is critical to have the right linear guidance system. Most robots have automated lubrication systems and components that require regular replacement.

industrial robot arms
Second, the robot cycle
One of the main points of keeping the robot running well is simple observation and listening, which can reveal a lot of information about the overall operation of the robot. The robot's robot works through specific actions, so listening to any abnormal sounds, such as howling, squeaking, etc., indicates that the bearing does not rotate properly or that some other component is stuck. The robot link section moves along the guide rails with power cables and vacuum hoses, giving a normal click, but the sound is smooth and stable. Check any bearings that can be observed to ensure they rotate smoothly. Simply checking and listening to some signs of wear or adjustments can greatly help keep the robot in optimal operating condition.
Third, pay attention to wiring wear
When the surface of the robot is inspected, if black particles or powder are found, it indicates that the robot circuit wiring shows signs of wear. However, even if you can't find these wear signals, look closely at all power, transformer, or encoder cables. The inside and outside of the wiring path can be used, because the wiring of the robot is continuously rubbed during the production cycle, or it is attached to the cable guide. The wiring will eventually wear out and fail. Ensure the safety of the wiring tie and the proper installation of the cable.


[TOP]